473
192.168.2.3
Interface Address fe80::203:fff:fe01:d28
Timer interval configured, Hello 10,
Dead 40, Wait 40, Retransmit 5
Hello due in 00:00:10
OSPF protocol timer; including hello
packet, poll interval packets, router dead,
router retransmission.
Neighbor Count is 1, Adjacent neighbor
count is 1
Numbers of the adjacent layer 3 switch;
number of the layer 3 switches established
with neighbor relation
13.7.5.1.10 show ipv6 ospf neighbor
Command: show ipv6 ospf [<tag>] neighbor [<neighbor_id> | <ifname> detail |
detail ]
Function:
Show OSPF adjacent point messages
Parameter: <tag>
is process tag, which is a character string
<neighbor_id>
is the neighbor ID shown in IPv4 address format
detail: Show neighbor details
<ifname>
name of the interface
Default:
Not displayed
Command Mode:
All modes
Usage Guide:
OSPF neighbor state can be checked by viewing the output of this
command
Example:
OSPFv3 Process (*null*)
Neighbor ID Pri State Dead Time Interface Instance ID
192.168.2.3 1 Full/Backup 00:00:29 Vlan1 0
192.168.2.1 1 Full/DR 00:00:38 Vlan2 0 Vlan1
Displayed information
Explanation
Neighbor ID
Neighbor ID
Instance ID
Instance ID
Address
IP address of neighboring layer 3 switch
Interface Interface
the neighbor belongs
State
Neighbor relationship state
Pri Priority
13.7.5.1.11 show ipv6 ospf route
Command: show ipv6 ospf [<tag>] route
Function:
Show the OSPF route table messages
Parameter: <tag>
is the processes tag, which is a character string
Default:
Not displayed
