375
Enable the RIP protocol mode
Switch(config)#router rip
Switch(config-router)#
13.4.3.31 send-lifetime
Command: send-lifetime <start-time> {<end-time>| duration<seconds>| infinite}
no send-lifetime
Function:
Use this command to specify a key on the keychain as the time period of
sending keys. The “
no send-lifetime
” cancels this configuration.
Parameter:
<start-time>
parameter specifies the starting time of the time period, which
is :
<start-time>={<hh:mm:ss> <month> <day> <year>|<hh:mm:ss> <day>
<month> <year>}
<hh:mm:ss>
Specify the concrete valid time of
accept-lifetime
in hours,
minutes and second
<day>
Specifies the date of valid, ranging between 1 -31
<month>
Specifies the month of valid shown with the first three letters of the
month, such as Jan
<year>
Specifies the year of valid start, ranging between 1993 - 2035
<end-time>={<hh:mm:ss> <month> <day> <year>|<hh:mm:ss> <day>
<month> <year>}
<end-time>
Specifies the due of the time period, of which the form should be:
<end-time>={<hh:mm:ss> <month> <day> <year>|<hh:mm:ss> <day>
<month> <year>}
<hh:mm:ss>
Specify the concrete valid time of
accept-lifetime
in hours, minutes
and second
<day>
Specifies the date of valid, ranging between 1 -31
<month>
Specifies the month of valid shown with the first three letters of the
month, such as Jan
<year>
Specifies the year of valid start, ranging between 1993 -2035
<seconds>
is the valid period of the key in seconding and ranging between
1-2147483646
Default:
No default configuration
Command Mode:
Keychain-key mode
Usage Guide:
Refer to the 3.13 RIP authentication section.
Example:
The example below shows the send-lifetime configuration on the keychain
named mychain for key 1.
Switch# config terminal
