Edge-Core ECS4610-24F, Руководство по управлению

Страница: 608 / 1154

C
HAPTER
24
| System Management Commands
Line
– 608 –
timeout login
response
This command sets the interval that the system waits for a user to log into
the CLI. Use the no form to restore the default setting.
S
YNTAX
timeout login response [ seconds ]
no timeout login response
seconds - Integer that specifies the timeout interval.
(Range: 0 - 300 seconds; 0: disabled)
D
EFAULT
S
ETTING
CLI: Disabled (0 seconds)
Telnet: 300 seconds
C
OMMAND
M
ODE
Line Configuration
C
OMMAND
U
SAGE
◆
If a login attempt is not detected within the timeout interval, the
connection is terminated for the session.
◆
This command applies to both the local console and Telnet connections.
◆
The timeout for Telnet cannot be disabled.
◆
Using the command without specifying a timeout restores the default
setting.
E
XAMPLE
To set the timeout to two minutes, enter this command:
Console(config-line)#timeout login response 120
Console(config-line)#
disconnect
This command terminates an SSH, Telnet, or console connection.
S
YNTAX
disconnect session-id
session-id – The session identifier for an SSH, Telnet or console
connection. (Range: 0-4)
C
OMMAND
M
ODE
Privileged Exec
C
OMMAND
U
SAGE
Specifying session identifier “0” will disconnect the console connection.
Specifying any other identifiers for an active session will disconnect an SSH
or Telnet connection.