Edge-Core ECS4610-24F, Руководство по управлению, Страница: 116 / 1154

C
HAPTER
4
| Basic Management Tasks
Console Port Settings
– 116 –
◆
Data Bits – Sets the number of data bits per character that are
interpreted and generated by the console port. If parity is being
generated, specify 7 data bits per character. If no parity is required,
specify 8 data bits per character. (Default: 8 bits)
◆
Stop Bits – Sets the number of the stop bits transmitted per byte.
(Range: 1-2; Default: 1 stop bit)
◆
Parity – Defines the generation of a parity bit. Communication
protocols provided by some terminals can require a specific parity bit
setting. Specify Even, Odd, or None. (Default: None)
◆
Speed – Sets the terminal line’s baud rate for transmit (to terminal)
and receive (from terminal). Set the speed to match the baud rate of
the device connected to the serial port. (Range: 9600, 19200, or 38400
baud; Default: 115200 baud)
N
OTE
:
The password for the console connection can only be configured
through the CLI (see "password" on page 604 ).
N
OTE
:
Password checking can be enabled or disabled for logging in to the
console connection (see "login" on page 603 ). You can select
authentication by a single global password as configured for the password
command, or by passwords set up for specific user-name accounts. The
default is for local passwords configured on the switch.
W
EB
I
NTERFACE
To configure parameters for the console port:
1.
Click System, then Console.
2.
Specify the connection parameters as required.
3.
Click Apply
Figure 15: Console Port Settings