Edge-Core ECS4610-24F, Руководство по управлению

Страница: 594 / 1154

C
HAPTER
24
| System Management Commands
File Management
– 594 –
“Factory_Default_Config.cfg” can be copied to the FTP/TFTP server, but
cannot be used as the destination on the switch.
boot system
This command specifies the file or image used to start up the system.
S
YNTAX
boot system { boot-rom | config | opcode }: filename
boot-rom * - Boot ROM.
config * - Configuration file.
opcode * - Run-time operation code.
filename - Name of configuration file or code image.
* The colon (:) is required.
D
EFAULT
S
ETTING
None
C
OMMAND
M
ODE
Global Configuration
C
OMMAND
U
SAGE
◆
A colon (:) is required after the specified file type.
◆
If the file contains an error, it cannot be set as the default file.
E
XAMPLE
Console(config)#boot system config: startup
Console(config)#
R
ELATED
C
OMMANDS
dir (598)
whichboot (599)
Table 36: Flash/File Commands
Command Function Mode
boot system Specifies the file or image used to start up the
system
GC
copy Copies a code image or a switch configuration to or
from flash memory or an FTP/TFTP server
PE
delete Deletes a file or code image PE
dir Displays a list of files in flash memory PE
whichboot Displays the files booted PE