Versión 1.2
2
Installation,operation and maintenance manual.
HEATED UNITS
MC-120, MC-180, MCP-120, MCP-180, SMC-12, SMC-16
WARRANTY
Edesa Hostelera S.A. assumes liability for manufacturing defects only. This warranty excludes,
therefore, any liability for the incorrect handling or operation of the equipment by the customer or
user. This warranty will remain in effect for a period of 1 year and will cover components with
manufacturing defects only. Labour and transport costs are the exclusive responsibility of the
customer in all cases. Edesa does not accept any responsibility for defects attributable to transport
unless claims are made within 24 hours of receipt of the goods.
SPECIFICATIONS
•
Made of stainless steel 18/10.
•
Reinforced and insulated worktop with rounded corners.
•
Have a reinforced central shelf.
•
Sturdy legs with height8-adjustable feet
.
•
Hot zone with 2 sliding doors, and 4 sliding doors in the pass-through hot plate.
•
Ventilated hot storage by fan and heaters.
•
The temperature is regulated and controlled using a thermostatic control.
•
Equipped with an analogue thermometer.
•
Unit “on” indicator pilot light
.
•
Double-wall doors with ecological polyurethane insulation with a density of 40 kg
•
Temperature range b30ºC and +90ºC.
MC-120,
MCP-120,
SMC-12,
SMC-16
Heating elements: 1 de 2000W
Consumption: 7A
MC-180, MCP-180
Heating elements: 1 de 1400W
1 de 2000W
Consumption: 15,5A
I
NSTALLATION
Place the unit on a flat surface and make sure that it is correctly levelled.
Connect the unit to the mains power supply
(230V). Connect the unit to the mains power supply.
(See Diagrams)
Operation
Turn on the unit at the general on/off switch.
Select the working temperature by turning the thermostat control to the desired setting.
The pilot light located next to the thermostat turns on when the heating elements are in operation.
For optimum operation it is recommended to turn on the unit and allow it to heat up to the required
temperature b
<0}
efore introducing the product with the doors closed .
Never obstruct the hot air vents located inside the lower hot section opposite the fan.
