BIO FILTER
Function
The refrigerator may be equipped with a filter that absorbs any unpleasant smells
produced by the food, and retains microorganisms (mould and bacteria) from the
circulating air.
Location
The BIO FILTER is located on the inside of the reflector
cover on the refrigerator light.
Activation
If your refrigerator has a BIO FILTER, the procedure for
activating it is as follows:
1.- Press the top tab and remove the light reflector cover
(Fig.5).
2.- Separate the filter from the cover (Fig.6) and remove
the seals by pulling on the red tabs (Fig.7).
3.- Then press on the BIO FILTER window until you hear a click. After a few
seconds the time scale will begin to colour in (Fig.8).
4.- Put the filter back in place and fit the cover into its corresponding recess
(firstly position the lower part and then click the top part into place.)
DOUBLE FRESH SYSTEM
Your refrigerator is fitted with this system, the top rack covering the fruit and
vegetable baskets has a membrane filter maintaining a high level of humidity in the
baskets. The humidity level provided is ideal to ensure that vegetables do not dry,
out, ensuring that they retain all their texture, flavour and nutritional properties.
9
Fig.5
Fig.7
Fig.6
Fig.8
Содержание 1CM34NF-904275467
Страница 92: ...03 06 FQ8X001C1 ...