EDER Maschinenbau 400200 Скачать руководство пользователя страница 8 | Manualshive

Страница: 8 / 39

EDER Maschinenbau 400200 Скачать руководство пользователя страница 8

7

Attachments with chain drive

409001_01 | 12.2020

Persons under the age of 18 may only use the device under the
supervision of a qualified person.

Points to observe

General safety instructions

> Always follow the instructions in this manual to avoid hazards and

prevent damage.

> Observe the relevant accident prevention regulations and other

generally recognised safety and occupational health rules.

> Only carry out repair, set-up, maintenance and cleaning work and

transport the device when the drive is switched off and the tool is
stationary.

> Operate the device exclusively with the protective equipment fitted

or provided by the manufacturer.

> Never leave the device unattended during operation.

> If you have long hair, wear a hairnet when working with the device.

> Do not smoke while refuelling or while working with the device.

> When using the device, observe the information on vibrations and

sound level given in the chapter Technical data.

Safety instructions for the workplace

> Ensure that the workplace and the traffic routes required for

transporting the wood to and from the site are safe.

> Keep the working area free of wood debris, obstacles and tripping

hazards. Eliminate slippery and smooth areas. Do not use sawdust
or wood ash for this purpose, otherwise there is a risk of slipping.

> Ensure adequate lighting at the workplace.

> Ensure that a level and step-resistant area with sufficient freedom of

movement is available for working.

> When using chainsaws with combustion engines, only work in well-

ventilated environments and not in enclosed spaces. Exhaust fumes
contain toxic carbon monoxide.

> Do not allow persons to approach the running device. Keep persons

and animals away from the workplace. Children, animals and adults
must keep at least 10 metres away from the running device.

> Never work in the rain as the stability in wet conditions is impaired.

> Do not leave the device standing in the rain.

Behaviour in an emergency

If, for example, malfunctions or dangerous situations pose an immediate
risk of injury to persons or damage to the device:

> Switch off the device to which the attachment is mounted.

«
...
6
7
8
9
10
...
»

Содержание 400200








































Отзывы:

Нет отзывов