EDER Maschinenbau 400200 Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 39

EDER Maschinenbau 400200 Скачать руководство пользователя страница 4

3

Attachments with chain drive

409001_01 | 12.2020

About this guide

Validity

These instructions apply to attachments (accessories) to be mounted on
chainsaws for debarking and milling tree trunks and wood in the following
variants:

EDER Bark Stripper ESG-C

EDER Flat Planer EPH-C

EDER Curved Planer ERH-C

EDER Contour Planer EKH-C

EDER Groove Cutter ENF-C

EDER Wire Brush ERB-C

EDER Bark Beetle Cutter EBF-C

They are aimed at forestry professionals and private individuals with
basic knowledge of wood processing.

The instructions contain important information on how to properly mount
the attachments on a chainsaw, start them up, operate them, use them,
maintain them and rectify simple faults yourself.

Warranty

Attachments  are  covered  by  the  statutory  warranty  period.  The  seller
must be notified immediately of any defects that can be proven to be due
to material or assembly errors. Proof of purchase of the attachment must
be provided by presenting the invoice and receipt when making a claim
under the warranty. The warranty is excluded with regard to the parts if
the defects are caused by natural wear and tear, temperature, weather
conditions  as  well  as  defects  resulting  from  faulty  connection,
installation, operation, lubrication or force. Furthermore, no warranty is
given  for  damage  caused  by  unsuitable  improper use  of the  machine,
e.g.  improper  modifications  or  repair work  carried out  by  the  owner  or
third  parties  under  his  or  her  own  responsibility,  or  in  the  case  of
deliberate  machine  overload.  The  manufacturer  does  not  accept  any
warranty for:

•

Parts which are subject to natural wear and tear

•

Non-compliance with the operating instructions and insufficient or
incorrect care

•

The consequences of improper maintenance and servicing

•

Damage from improper handling and incorrect operation

Guarantee

The  warranty  period  shall  be  24  months  from  the  date  of  delivery  for
exclusively  private  use,  and  12  months for commercial  or  professional
use  or  application  or  for  rental.  The  statutory  warranty  remains
unaffected.  Warranty  claims  must  always  be  proven  by  the  buyer  by

«
...
2
3
4
5
6
...
»

Содержание 400200








































Отзывы:

Нет отзывов