EDER Maschinenbau 400200 Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 39

EDER Maschinenbau 400200 Скачать руководство пользователя страница 5

409001_01 | 12.2020

Attachments with chain drive

4

EN

means of the original purchase receipt. A copy of this is to be enclosed
with  the  warranty  application.  The  buyer's  address  and  machine  type
must  be  clearly  identifiable  for  professional  or  commercial  use.  Any
defects  occurring  within  the  warranty  period  due  to  material  or
manufacturing faults must be remedied by repair if they have occurred
despite proper operation and care of the machine.

No guarantee or warranty

Using the chainsaw with the attachments will invalidate the chainsaw
warranty.

Eder Maschinenbau GmbH is not liable for any damage to the chainsaw
used. Use the chainsaw with the attachments at your own risk.

Wear items such as chains, sprockets, knives and guide bars are
excluded from the warranty.

Presentation of the warning notes

SIGNAL WORD

Type and source of the danger!

Consequences

➢

Danger prevention

•

The

warning sign

(warning triangle) draws attention to danger of

life or injury.

•

The

signal word

indicates the severity of the danger.

•

The paragraph

"Type and source of danger"

indicates the type or

source of danger.

•

The paragraph

"Consequences"

describes the possible

consequences of not observing the warning.

•

The paragraph

"Danger prevention"

indicates how to avoid the

danger. It is imperative that you comply with these measures for
averting danger!

!

«
...
3
4
5
6
7
...
»

Содержание 400200








































Отзывы:

Нет отзывов