edenox VCRA-CV-CT, Инструкция по эксплуатации

Страница: 8 / 21

3
edenox.com
English
edenox.com
4. USE, REGULATION AND CONTROL
The appliance and the light screen of the display cabinet are turned on by means of the start-up
switches located on the front part of the controls. Said switches will light up and the start-up of the motor
will be heard after 2 minutes. This delay is the protection programmed by default, which should not be
modified by the user.
The regulation is carried out by means of the digital electronic thermostat, allowing the adjustment of the
different working temperatures depending on the existing environmental conditions.
The use instructions of the digital thermostat are attached to this manual. However, WE DO NOT
RECOMMEND THE ADJUSTMENT OF THE THERMOSTAT BY UNQUALIFIED PERSONNEL. Please,
CONTACT YOUR DISTRIBUTOR IN ORDER TO HAVE THE NECESSARY ADJUSTMENTS CARRIED
OUT.
This appliance carries out defrosting to get rid of the ice generated by the evaporator. It may be
necessary to sometimes slightly vary the default programme of said defrosting process due to climate
reasons and/or conditions in the premises.
If there is an excessive accumulation of ice on the evaporator or in the event of a lack of cooling
performance of the appliance, please contact your distributor for a diagnosis to be made and assess if
an adjustment in the defrosting programme is necessary.
RECOMMENDED WORKING TEMPERATURES
STATUS
CUBA TEMPERATURE
(ºC)
DISPLAY CABINET
TEMPERATURE
(ºC)
WITH
SCREEN UP
Between 0 and 4 Between 5 and 10
WITH
SCREEN
DOWN
Between 0 and 4 Between 3 and 6
5. RISKS AND USE PRECAUTIONS
Keep to the recommendations made by the food manufacturers.
Never place hot food or recipients in the appliance.
The appliance must be only repaired by qualified personnel. Please contact your distributor and do not
attempt to open this appliance.
If the appliance is not going to be used for long periods of time, make sure it is empty, cleaned and
disconnected from the mains electricity supply.
The working temperature of the appliance may be affected by the ambient temperature and its location.
Make sure that external sources do not influence the appliance that may prejudice its performance
(heating, direct sources of heat or similar).