Drop-In Elegance
5
2.3
Intended use and restrictions
Featuring the GN containers, the water bain-marie is used to keep and display hot meals that have
been prepared beforehand, allowing them to be served later.
Before using the water bain-marie, its electrical system needs to be checked for efficiency and reliability.
After work, switch off the device by setting the control on the panel to 0 (Figure 1, ‘
C
’), and then
disconnect the power cable of the water bain-marie.
WARNING!!!
Before the bain-marie is first put into operation, it is necessary to remove the protective film and the
protective substance from the surfaces of the device by wiping it with soapy water, concentrating on the
inner surfaces of the chamber.
2.4
Manufacturer’s identification label description
The data plate is located under the cabinet at right of the condensing unit. Under no circumstances
should the data plate be removed from the unit. The data plate is essential to identify the particular
features of your machine and it is of great benefit to installers, operators, and maintenance personnel. It
is recommended that, in the event the data plate is removed, you copy down the essential information in
this manual for reference before installation. Removal of data plate will void the warranty.
Model
Electricals
Serial Number
(8 digits and ends in “M”)
Code
