Technical information ACCESS-IT UNIT
p.28/42
3) SOLO-AI Reader (RS485)
(?) Data sheet:
Be sure to use the same pair for A and B
Be sure to separate the supply from the RS485 bus
Characteristic:
Sensitive connection
Screen:
Recommended
To reach 1,200 m, you must fit a 220 resistor between points A and B at each end of the network (see
above).
Attention:
The total length must not exceed the recommended distance.
Note:
You can connect up to 2 SOLO-AI with an ACCESS-IT UNIT
12V DC supply
SYT recommended
0.6 mm
2 pairs recommended
