background image

Catalog #70080, #70081, #70082, #70083
Brochure No. 63-0312

©2008 Edelbrock Corporation

Rev. 07/08

Page 4

WHAT IS NITROUS OXIDE?

Nitrous Oxide is a cryogenic gas composed of nitrogen and oxygen molecules. It is stored as a “gas over a liquid” which
means that both liquid and gaseous nitrous oxide is delivered into your engine. It is 36% oxygen by weight, which is what
produces the added horsepower. By injecting more oxygen (and a corresponding fuel signal), we create the additional
power much like a supercharger or a turbocharger does.

Nitrous Oxide is considered an “oxidizer” and not a fuel. Nitrous oxide is non-flammable by itself. Because nitrous oxide
is a cryogenic, the same safety methods in handling dry ice apply to nitrous. Direct contact with the skin will cause a burn
similar to contact with dry ice. The exception in using nitrous oxide comes from increased breathing hazards associated
with the gaseous properties of nitrous oxide.

Nitrous Oxide is offered for sale in two common grades, which are U.S.P., and 

Nytrous Plus. U.S.P. nitrous oxide is medical

grade nitrous oxide. Its common use is dental and veterinary anesthesia as well as use as a propellant in food such as
canned whip cream. U.S.P. is not available to the public and would provide no advantage in the making of horsepower over
the automotive grade nitrous oxide.

Nytrous Plus was specifically designed for automotive consumption and differs from U.S.P. in that it contains trace
amounts of sulfur dioxide (100 parts per million or “PPM”) added to prevent substance abuse. The Sulfur Dioxide is an
irritant to all of your breathing passageways and will cause sore throats and sore nasal passages.

Nytrous Plus was

specifically created for automotive applications and is available for sale to the public at many speed shops across the USA.

Safety Steps For Working With Nitrous Oxide

1.

Never inhale 

Nytrous Plus (Nitrous oxide (N2O) for vehicular use) as continued exposure can cause 

death

.

Nytrous Plus has a maximum of 100 parts per million (ppm) of sulfur dioxide and will cause irritation to nose
and throat passageways.

2.

When working around any high-pressure gas including nitrous oxide, take all precautions to ensure that
exposure to nitrous oxide is minimized.

3.

Do not vent nitrous oxide to atmosphere in confined spaces. 

Only vent nitrous oxide in well-ventilated

and open areas.

4.

Liquid nitrous oxide 

can cause burns to human flesh

so protect all skin in and around your hands, arms

and face. Wear safety glasses and rubber gloves to protect from liquid nitrous oxide splatter.

5.

When venting down the nitrous system, vent the line down closest to the nitrous bottle.

6.

Do not use any form of Teflon tape as sealant on fitting connections.  Use only Teflon paste.

7.

When washing components, ensure the clean components are completely dry, free of oils, and solvents.
Failure to remove all liquids could cause component or system failure.

8.

Always turn the bottle off before making any repairs to the nitrous delivery system.

9.

To safely release nitrous oxide in a pressurized line;
a. Position vehicle in a well-ventilated, unconfined space.
b. Turn bottle off.
c. Slowly loosen the nitrous feed line at the bottle until you hear a light hissing noise.
d. Allow the entire nitrous pressure to vent from the line.
e. Perform your work on the system.

f.

Tighten the nitrous line to the bottle.
g. Slowly open the nitrous bottle valve, listening for leaks.
h. Perform leak checks on all effected fittings and the bottle fitting.

Anytime you have questions or concerns with your Edelbrock Nitrous System,

please call our technical support hotline at

1-800-416-8628

before you start your engine.

Содержание 70080
































Отзывы: