Edelbrock 70050, Инструкция

Страница: 21 / 29

2.15 Microswitch Installation and Wiring (cont.)
Due to the wide variety of carburetor and throttle linkage combinations in use, it is impossible to supply a
microswitch bracket custom-tailored to each application. The universal bracket supplied will need to be
modified to fit your specific application.
The microswitch bracket is drilled to permit many different switch mounting positions. This flexibility
allows for the microswitch to be positioned in such a manner to engage the carburetor linkage without
interfering with its normal and safe operation. The bracket may be manipulated (bent, twisted, and/or
cut) to best suit your combination. Mount the microswitch on the carburetor so the actuation arm is
triggered by throttle linkage making sure that all wiring and the bracket do not interfere with the smooth
and safe operation of the carburetor.
Adjust the microswitch to ensure the actuation arm “clicks” at the same point your throttle linkage
reaches wide open throttle against the throttle stop. At no time should the microswitch be enabled
before wide open throttle.
Pictured here is the microswitch assembly
mounted for use with an Edelbrock Carburetor on
an Edelbrock intake manifold. This is an example
of one of the ways to mount a microswitch to your
manifold. The microswitch bracket allows for
many different mounting positions, to clear almost
any potential interference around the carburetor/
plate mounting surface.
Please look for potential microswitch mounting
locations and adapt your microswitch bracket
according to the needs of your particular
application.
2.16 Final Electrical Installation Recommendations
At this time, it is advised that you double check the following areas:
1. Double check all wires so that they do not come in contact with any heat sources like
exhaust manifolds, and EGR crossovers, etc.
2. Double check the wires that lead from the microswitch to ensure they do not interfere with
the operation of the carburetor linkage.
3. Make sure the relay and the fuse are serviceable and mounted securely.
You are ready to hook up your battery and prepare your vehicle to run.