Edelbrock 70050 Скачать руководство пользователя страница 14 | Manualshive

Страница: 14 / 29

background image

2.7

Nitrous Solenoid Mounting and Installation

1. Hold the nitrous solenoid securely (like in a bench vise) being careful not to harm the

solenoid or block the inlet or outlet of the solenoid.

2. Install nitrous filter fitting (Blue fitting 4AN X 1/4 NPT) using liquid Teflon in the inlet port of

the nitrous solenoid.

3. Install 4AN x 1/8 NPT (Blue straight fitting) using liquid Teflon in the outlet port of the

nitrous solenoid.

i. Remove nitrous solenoid assembly from vise.

ii Attach solenoid-mounting bracket to the bottom of nitrous solenoid.

iii. Verify desired mounting location for nitrous solenoid.

4. Install nitrous solenoid. If solenoid-mounting location is difficult to access, leave solenoid

loose so the solenoid inlet and outlet port can be easily accessed.

5. Leave wires loose for electrical system installation.
6. Attach nitrous feed line to solenoid. (blue fitting 4AN x 1/4 NPT).

2.8

Fuel Solenoid Mounting and Installation

1. Hold the fuel solenoid securely (like in a bench vise) being careful not to harm the

solenoid or block the inlet or outlet of the solenoid.

2. Install 6AN x 1/4 NPT fuel inlet fitting using liquid Teflon in the inlet port of the fuel

solenoid.

3. Install 4AN x 1/8 NPT (Red straight fitting) using liquid Teflon in the outlet port of the

nitrous solenoid.

4.  Remove fuel solenoid assembly from vise.
5.  Attach the universal solenoid-mounting bracket to the bottom of nitrous solenoid.
6.  Verify desired mounting location for nitrous solenoid.
7.  Install fuel solenoid. If solenoid-mounting location is difficult to access, leave

solenoid loose so the solenoid inlet and outlet port can be easily accessed.

8. Leave wires loose for electrical system installation.

Pictured here is the Performer RPM solenoid mounted on
an Edelbrock intake manifold using a modified solenoid
bracket. The modifications performed to a solenoid
bracket depend on many factors. The considerations of
solenoid placement are the same for both Nitrous and
Fuel. The modifications to the solenoid bracket pictured is
just an example. The modifications for all system
brackets will be different per your application.

The line length between the Performer RPM fuel solenoid
and the jet fitting on the injection plate is 8 inches. The
line length between the Performer RPM nitrous solenoid
and the jet fitting on the injection plate is 12 inches Other
factors or components that could potentially interfere with
solenoid placement are:

Water neck/thermostat housings

Water fittings

Distributor housings

Vacuum advance canisters

Air filter housings

Throttle linkage passageways

Valve covers and valve cover fasteners

EGR passageways.

«
...
12
13
14
15
16
...
»

Содержание 70050






























Отзывы:

Нет отзывов

Похожие инструкции для 70050

Бренд: Laser Страницы: 8

Бренд: Zavoli Страницы: 26

Бренд: FORM FIT Страницы: 2

Бренд: Yakima Страницы: 13

Бренд: Menabo Страницы: 11

Бренд: Jeep Страницы: 380

Бренд: Xblitz Страницы: 30

Vehicle Asset Communicator

Бренд: I.D. Systems Страницы: 41

Бренд: BrandMotion Страницы: 6

Бренд: RAM Страницы: 330

2003 Silhouette

Бренд: Oldsmobile Страницы: 466

Бренд: Honda Страницы: 268

Бренд: Smappee Страницы: 28

Бренд: Pyle Страницы: 14

2001 Accord Sedan

Бренд: Honda Страницы: 372

Бренд: Imiola HAK-POL Страницы: 3

PRIME DESIGN HRR-E-PM52

Бренд: Safe Fleet Страницы: 12

Бренд: Harbor Freight Tools Страницы: 8

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды