background image

www.edelimmersys.com

6

Things to do before labor begins

  Check that the Faucet/Tap-Hose Connectors you have will fit a set of taps in your home. While we 

have provided options that will work with most taps in the Basic and Standard Kits (Europe only), we 

cannot guarantee that any supplied by us will fit your taps. You can get alternatives at good hardware 

stores.

  Read the instructions - they have been created from many experiences with the pool!

  Estimate how long it will take to fill the pool with your hot water system: the Regular Pool is approx 4 

bathtubs full of water and Mini Pool 2.5-3 bathtubs.

  Practice setting up the pool to familiarise yourself with it before labor begins.

  Warm pool up to room temperature before unfolding.

  Remove jewellery or other sharp items from your body and clothing.

Setting up your Birth Pool in a Box - 

15 to 30 minutes

IF THEY ARE COLD TO THE TOUCH, DO NOT UNFOLD OR INFLATE

Ensure Pool and single-use Liner are both at room temperature before unfolding and inflating. Remove 

from all packaging and leave to stand for 72 hours if they have been exposed to temperature below 

10°C (50°F). - the material becomes brittle at low temperatures.

Actions

Tips

Prepare floor area:

 remove sharp objects

 sweep/vacuum

 place Floor Cover on floor

If your floor is concrete, stone or tile, place a 

rug or blanket flat underneath to reduce heat 

loss into floor.
The pool width increases when filled with water 

- leave 4” (10cm) space to the nearest wall.

The midwife will want room 

to assist from at least 3 

sides of the pool. A floor 

covering is recommended.

Lift floor valve 5cm above floor, place nozzle 

in valve and Inflate floor until creases have 

largely disappeared, then close valve firmly. 

Repeat with seat - inflate and close valve 

firmly. Twist pump nozzle in valve if pumping is 

difficult - outlet may be blocked by material.

One side of base of the 

valve can be pushed open 

by the nozzle. Try different 

angles! Insert until you get 

a soft click. Over-inflation 

is a cause of floor seam 

failure.

Содержание Birth Pool in a Box Eco













Отзывы: