eddyfi TriTrax 200, Руководство пользователя

Страница: 5 / 36

TriTrax™ 200 Vertical Crawler
Document: UMDT017749.docm Revision: A02 Created by: JS Date: 13 Apr 2021 IPN: 3094329-A02
Source Location: C:\ePDM\ISLEng\Products\DT-VersaTrax100MkII\Manuals\UMDT017749.docm Page 5 of 36
User Ma
nual
Specifications
Minimum Vehicle
Dimensions
Base Configuration: No Spacers
Ø200 mm x 425 mm Long (8 x 16.7 in)
Vehicle Weight
1
Base Configuration 8.5 kg (19 lb)
Depth Rating 30 m (100 ft)
Pipe Size
Range
2
Base Configuration: No Spacers
Ø203mm to Ø305mm (8” to 12”) pipe
Extension 50mm (2 inch) spacers
Ø305mm to Ø405mm (12” to 16”) pipe
Extension 75mm (3 inch) spacers
Ø355mm to Ø455mm (14” to 18”) pipe
Min Bend
Radius
3
8-Inch Pipe 610mm (24 in) Radius IN 200 mm (8 in) pipe
12-Inch Pipe 460mm (18 in) Radius IN 305 mm (12 in) pipe
Maximum Tether Length
4
300 m (1,000 ft)
Tracks 3x Microtracs
™ 4000
Camera
Front Spectrum
™ 45 Pan & Tilt
Rear
Onyx™
Lights 2x 801 Lights
Reel Optional portable tether reel with payout encoder
Power Requirements 100
– 240 VAC 50/60Hz, 5A
Operating Temperature 0
– 40 ºC (32 – 122 ºF)
Storage Temperature -20°
– 60 ºC (-4 – 140 ºF)
1
Weights may vary depending on optional components
2
Specified pipe sizes are internal diameters
3
Using 10-pin Connector. In general, as pipe size increases Min Bend Radius decreases
4
Actual travel distance may be decreased depending on inspection geometry (traction and number of bends)
Precautions
IMPORTANT: When configuring a 70V system, check to see if the tracks are compatible. Older
versions of 4000 series Microtracs™ are not 70V compatible. Look for the Wide Input Voltage
symbol
\V/ located on the side plate of the track indicating 70V compatibility.