TriTrax™ 200 Vertical Crawler
Document: UMDT017749.docm
Revision: A02
Created by: JS
Date: 13 Apr 2021
IPN: 3094329-A02
Source Location: C:\ePDM\ISLEng\Products\DT-VersaTrax100MkII\Manuals\UMDT017749.docm
Page 4 of 36
User Ma
nual
About This Manual
This manual has been prepared to assist you in the operation and maintenance of your Eddyfi Technologies
equipment. Correct and prudent operation rests with the operator who must thoroughly understand the
operation, maintenance, service and job requirements. The specifications and information in this manual
are current at the time of printing.
This product is continually being updated and improved. Therefore, this manual endeavor to explain and
define the functionality of the product. Furthermore, schematics or pictorials and detailed functionality may
differ slightly from what is described in this manual.
Eddyfi Technologies reserves the right to change and/or amend these specifications at any time without
notice. Information in this manual does not necessarily replace specific regulations, codes, standards, or
requirements of others such as government or site regulations.
This manual is copyright © 2021 by Eddyfi Robotics Inc. All rights reserved.
Description
The
TriTrax™ 200 Vertical Crawler system is a Microtrac™ 4000 based vehicle used for navigating pipes of
200
– 400 mm (8 – 16 in) internal diameter with the camera centered. The crawler can travel vertically in the
pipe up or down.
The inspection system has been manufactured with the hazards and demands of pipe inspection in mind. A
minimized vehicle profile provides maximum clearance for passage of service intrusions in the pipe. The
vehicle employs marine technology for underwater operation down to a depth of 30 m (100 ft).
The
TriTrax™ 200 can also be used in dry environments. The rugged design ensures a long service life and
helps protect the vehicle from damage during normal use.
