Eddyfi Technologies TSC Amigo2, Начало работы

Страница: 35 / 100

Software Overview
| 15
2. Instrument/Probe
. Up to three probes can be attached to the instrument at any one
time. Input connections are available for Amigo1 probes, the Sensu probes used with
PACE and the second generation Sensu2 probes for Amigo2.
3. Probe Select
allows you to choose which probe and configuration to use. This is described
in more detail on page 15 .
4. Import Probe
copies Amigo1 configuration files found on the root of a USB mass storage
device to the Amigo2’s memory. This only needs to be done the first time an Amigo1
probe is used on the instrument, or if a configuration file is changed. In this case the
current configuration file will be overwritten.
5. View Imported displays all the configuration files imported to the Amigo2’s memory and
allows you to delete any that are no longer required. For example, if you were installing a
new version of the file. For more detail see page 16.
6. File Transfer
. Transfer files between the Amigo2 and a USB mass storage device.
See page 16 for details.
7. Start/Resume
takes the user to the frontstage.
Probe Selection
Up to three probes can be attached to the instrument at any one time. Input connections are
available for Amigo1 probes, the Sensu probes used with PACE and the second generation Sensu2
probes for Amigo2. The
Probe Selection
dialogue box allows you to choose which probe and
configuration to use. This function can also be accessed from the
Backstage/General
tab or
the
Home Ribbon
, as described on page 22.
Figure 5
Probe selection
Many ACFM probes are calibrated for more than one material. If this is the case, the material
Configuration
can be selected from the list. The
Scan Mode
can be set to clock or encoder (if
you have an encoder fitted). In clock mode it takes several readings a second, regardless of
whether the probe is moving. In encoder mode it only gathers data when the probe is moving,
then displays the data against distance travelled. Before scanning can start, a connector and
probe must be selected as
Active
.