Eddyfi Technologies TSC Amigo2, Начало работы

Страница: 43 / 100

1 2 3 4 5 6 7 8 9
Software Overview
| 23
The Scanning Ribbon
The following commands are available during data collection:
Figure 17
Scanning ribbon
1.
Press
Stop
to end data collection.
2. Pause .
3. Clock/Linear
. Adds clock or linear marks to the data. A series of sequentially numbered
vertical lines corresponding to the numbered clock positions running around the
circumference of a pipe or tubular, or linear positions on a flat surface. These can be
configured in
Home>Markers
, as described on page 24. These must be configured before
pressing “Run”.
4. General
. Adds a series of unnumbered purple vertical lines to the data.
5.
Screen Scale
Auto-Center
, as described on page 21.
6. Screen Scale Auto-fit .
7.
Screen Scale
Default
.
8.
Screen Scale
Manual
.
9.
X and Y
Field
can be switched during data collection.