Magg™ 310
Document: umed018307
Revision: A01
Created by: ST
Date: 24 Feb 2021
IPN: 3097222-A01
Source Location: C:\epdm\isleng\products\ed-magghd\manuals\umed018307.docm
Page 21 of 30
User Ma
nual
Magnet Spacing
The
Magg™ 310 vehicle comes with the tracks spaced down from the main chassis plate using four
groups of 8mm and 4.5mm spacers (two groups per track). The vehicle comes with a kit of spacers to
accommodate a wide range of track spacing.
Use the following mounting hardware depending on the track spacers used:
•
When spacing the tracks between 6-12 mm (0.25-0.5 in), use M5x20 SHCS outboard and M5x25
SHCS inboard.
•
For spacing less than 6 mm (0.25 in), use M5x14 SHCS outboard and M5x18 SHCS inboard.
•
When spacing the tracks more than 12 mm (0.50 in), use M5x25 SHCS outboard and M5x30
SHCS inboard.
When remounting the tracks, make sure the whips are securely connected and the locking collars are
fully engaged. Be careful to not pinch the track whips, and route them upwards towards the top of the rear
crossbar.