Eddyfi Technologies LYNCS, Руководство пользователя

Страница: 26 / 39

26
Corrosion mapping mount
Figure 19: LYNCS-CM corrosion mapping mount overview
6. Spring loaded lever lock
Turn the lever to unlock the spring-
loaded pin in the mechanism. As the
corrosion mapping mount slides along
the
scanning frame, the pin
automatically drops into the next hole.
To continue sliding, rotate the lever
slightly to lift the pin.
When using the spring-loaded lever
lock the increment position of the
corrosion mapping mount
is
determined by the hole spacing in the
scanning frame.
7. Cam lever lock
Disengage the cam to allow the
corrosion mapping mount to move along
scanning frame. Re-engage when
located at desired position.
When using the cam lever lock the
position of the corrosion mapping
mount can be manually set to any
position along the scanning frame.
Ensure the spring-loaded lever locks the
pin in the raised position.
6.1 LYNCS-CM Specifications
The table below lists specification of the LYNCS CM system.
Dimensions (w × d × h) 742 × 198 × 109 mm (29.2 × 7.8 × 4.3 in)
Standard bar widths
412 mm (16.2 in)
Metric - 667 mm (26.2 in)
Imperial 675mm (26.6in)
Maximum scan width 510 mm (20.1 in)
Scanner
weight:
without water box 2.7 kg (6 lb)
with water box 3.5 kg (7.7 lb)
Circumferential scanning 100 mm (4 in) to flat plate
A full technical specification sheet is available to download from the web address below;
LYNCS Specification Sheet