Eddyfi Technologies LYNCS, Руководство пользователя

Страница: 20 / 39

20
5. LYNCS-WI Overview
Top View
Figure 12: LYNCS-WI frame top overview
1. Outer tool posts
Wedge tool posts that mount to the
outside of the scanner frame and are
secured by a single mounting clamp.
They also provide a tilt adjustment when
on small diameter pipework.
2. On board controls
Use this button for Pause / Resume
functionality.
Ensure the encoder umbilical cable is
plugged directly into the instrument
and scanner for this functionality.
Do not connect the encoder adapter
cable as this will enable
Increment /
Encoder Reset functionality.
*Adapter supplied with LYNCS-FULL, LYNCS-CM.
3. Tool post clamp
Used to hold the inner and outer tool
post in place along the scanning frame.
To engage the tool post clamp, turn lever
up to vertical position.
To disengage the tool post clamp, turn
lever down to horizontal position.
Ensure the tool post clamps are
disengaged (levers down) prior to
moving the tool post.
4. Inner tool posts
Wedge tool posts that mount between
the scanner frame and are secured by
clamps on either side of the tool post.
5. Outer tool post tilt adjustment
Used to tilt the outer tool posts forward
when on small diameter pipework.
To tilt the tool post forwards, loosen the
thumbscrew, tilt to the desired position
then tighten to lock tool post in place.
During setup, ensure outer tool posts
are in a vertical (un-tilted) position to
ensure ease of wedge setup. Tilt the
tool posts forwards when on the
inspection surface.