Spectrum 90
™ Camera
Document: UMAD007298.docm
Revision: A10
Created by: KJB
Date: 27 Sep 2019
IPN: 3041348-A10
Source Location: C:\ePDM\ISLEng\products\ad-spectrum90\manuals\UMAD007298.docm
Page 9 of 19
User Ma
nual
Mounting the Camera
The Spectrum 90™ camera can be mounted at the back plate using the three threaded M6x1 x 13mm
deep blind holes. These holes are also utilized for mounting the optional drop cone. Use M6x1 SS SHCS.
The length of the screws will depend on the thickness of the mounting bracket. Refer to the figures below.
The camera may be mounted in any orientation as the camera has continuous pan.
Alternatively, the cameras may be mounted by a clamp around the 89 mm (3.5 in) diameter stationary
portion of the barrel. Note the standard (60 m / 200 ft) and deep water (300 m / 1000 ft) cameras are
different lengths as illustrated.
CAUTION:
Avoid forcing the TILT or PAN mechanisms by hand. It will wear the
clutch discs and could cause premature failure.
FIGURE 2:
SPECTRUM 90™ STANDARD CAMERA MOUNTING DIMENSIONS