Spectrum 90
™ Camera
Document: UMAD007298.docm
Revision: A10
Created by: KJB
Date: 27 Sep 2019
IPN: 3041348-A10
Source Location: C:\ePDM\ISLEng\products\ad-spectrum90\manuals\UMAD007298.docm
Page 7 of 19
User Ma
nual
Safety
In order to be able to use this product properly and safely, every user must first read these operating
instructions and observe the safety instructions contained therein. Take care of these operating
instructions and keep them in a place where they can be accessed by everyone.
CAUTION
: Failure to follow these safety instructions may result in injury or
equipment damage.
WARNING:
High Voltage
36-70 VDC.
If the equipment is powered from a
source other than an Eddyfi Technologies provided controller, the power supplied
to the product must have reinforced isolation from the mains with no reference to
earth ground.
WARNING: Spark Hazard
- Under no circumstances should this equipment be
used in a potentially explosive atmosphere.
WARNING:
Intense Optical Radiation
- The Spectrum 90
™ camera lights are
extremely bright. Never look directly at the lights. Use a welding filter (shade #8
or higher) if inspecting the LEDs.
•
CAUTION:
Class II Laser:
Do not intentionally stare into
the beam. Typically, Class II relies on the blink reflex to limit
exposure to no more than ¼-second. Intentionally staring
into the beam will cause eye injury.
•
When performing maintenance or functional checks of the
lasers and camera lights, take precautions to protect
nearby personnel from unintended exposure which could
be temporarily blinding.
•
The Spectrum 90
™ camera is an industrial product. All personnel operating or maintaining this
equipment must be competently trained.