35
This restraint is certified for
aircraft use.
Use only on forward-facing
aircraft seats. Follow
instructions for vehicle
installation.
Contact the airline for their specific policies.
D-6
Installing on Aircraft
Attach Locking Clip
Thread both portions of the
vehicle belt onto the locking
clip, as close to the latch
plate as possible.
6.
Position Locking Clip
Position locking clip about
1 in. (2.5 cm) from vehicle
belt’s latch plate.
7.
Rebuckle Vehicle Belt
8.
9.
Check Vehicle Belt
Tightness
Grasp the child restraint
at the vehicle belt path
with one hand. Push and
pull the child restraint from
side to side, forward and
back. The child restraint
should not move more than
1 inch.
NOTE:
If it moves more than an inch, redo the steps 5 through 9
again or try another seating location.
Remove the locking clip when the vehicle seat belt is not
being used with a child restraint.
36
Meijer.com
