xx
39
40
E. Installing Rear Facing
E-2
Installing Base with LATCH
continued on next page.
Do not use LATCH along with the vehicle
lap or lap/shoulder belt.
Check LATCH belt before each use. Use
only if the belt can be tightened properly
and securely.
Failure to follow these warnings can
result in serious injury or death.
Place Base in Vehicle
Rear Facing
Center the base between
the vehicle anchors in the
chosen seating position.
1.
Remove LATCH from
Storage
2.
NOTE:
Review your vehicle owner’s manual for LATCH
belt use.
Thread LATCH Belt
Thread LATCH hooks
through belt path openings.
3.
Hook LATCH to Vehicle
LATCH Anchor
Fasten one LATCH belt
hook to the anchor in the
vehicle seat located in the
vehicle seat bight.
Repeat for other side of
child restraint.
4.
Tighten Belt
Push base down
FIRMLY
on the base and towards
the vehicle seat while
pulling up on the belt to
tighten.
5.
