From the bottom, pull the
metal retainer through the
carrier and insert it into
the middle slot.
Check Harness Height
With child in the child
restraint, check the
location of the harness
slot.
Follow the guidelines
below to determine the
correct harness height.
From the front, lift pad up
and place the buckle’s
metal retainter flush on
bottom of the carrier.
Replace the pad.
Pull up on buckle strap to
make sure it is secured.
The buckle must not pull
out.
To Change Harness
Location
With harness system
loose, from the back,
remove harness from the
splitter plate.
d.
e.
f.
9.
8.
10.
19
20
C. Basic Use
Rear-Facing Position
Upper harness slots must be
even with or just below
the
shoulders.
If the lowest upper harness slots
are above the child’s shoulders,
do not
use this child restraint.
From the front of child
restraint, pull harness
straps out.
continued on next page.
Failure to reinstall the harness system
correctly can result in serious injury or
death.
