E-SPVAC-I-0419
Page 7
1-800-638-3326
• edcoinc.com • [email protected]
5
IV.
Inspection & Maintenance
1
2
3
Use the internal pump
to evacuate the water.
You must hold the
switch down to operate
the pump.
If pump becomes
clogged, refer to
the pump cleaning
instruction on the next
page.
SLURRY VAC INSTRUCTIONS:
EMPTYING -
Collection vessel and pump must be cleaned after every single use. The
pump may be used while the vacuum is running, but if the pump needs to be cleaned
you must turn the vacuum off.
4
Once most of the water
has been pumped out
of the machine you
can open the slidegate
at the bottom of the
collection unit. The
solids can be flushed
or scooped out. Close
sidegate when finished.
Check for carryover
liquid by opening
the slidegate under
the filter hosuing.
Close slidegate when
finished.
Note:
The emptying/cleaning instructions must be performed after each use. Do not allow the
material to set up inside.
3
