E-SPVAC-I-0419
Page 6
1-800-638-3326
• edcoinc.com • [email protected]
4
Questions?
Call Ruwac at (413) 532-4030 or e-mail us at [email protected]!
III.
Start-Up
Note:
Electrical installation should be performed by a qualified electrician in accordance with
governing national and local electrical codes.
1
2
3
4
Check that the slide
valve is closed.
Connect to proper
power source as
indicated on the
serial tag.
Start machine using
the ON / OFF switch
on the motor domes.
Turn machine off using
the ON / OFF switch
on the motor domes.
SLURRY VAC INSTRUCTIONS:
START UP / SHUTDOWN
Machine should be
emptied after every use.
5
It is critical that you
empty/clean the vacuum
after each use. If
material is allowed to
“set up” inside it will
render the vacuum
inoperable. Please
refer to Section IV for
instructions.
STARTUP AND SHUTDOWN
