MU300 Rev1.0 Oct20
Page 39 of 54
Temperature Sensitivity Settings
When the temperature difference is less than
the sensitivity you set, the energy would not
accumulate and the adjustable range is 0~20
o
C.
Factory setting is 0.2
o
C by default.
Specific Heat Capacity Settings:
0.
CJ128SHC (National Standard)
1.
Others
25
Power Cut Compensation
Power cut compensation is a function to
calculate the current value during the outage
based on the average flow before power cut,
so as to compensate the total flow.
You could choose to enable/disable the
function.
26
K Factor
Each flowmeter would be calibrated before
leaving factory to get its meter coefficient,
which we call the K coefficient.
You also could calibrate the flowmeter in
service on site through M26 menu.
24
Temperature
*R
Source
Sensitivity
SHC
Value
0.20
℃
24
Temperature
*R
Source
Sensitivity
SHC
Options
0.CJ128
Others
4.2
KJ/m³
℃
25
PowerDown COMP
*R
Options
0.ON
25
K Fctor
*R
Value
1.00
