eDAQ PowerChrom 280, Руководство пользователя

Страница: 8 / 38

4 PowerChrom
The Front Panel
The front panel of your PowerChrom 280 unit, Figure 1–1 , has three
indicators that show the various states of the system.
The Power indicator is a blue light which shows when the recording unit
is on. If this indicator does not light when the unit is switched on, check
that power is turned on at the wall socket and the mains cord is
plugged in correctly. Also check that the power socket is working by
connecting another appliance.
PowerChrom PowerChrom
Power
Status
Start
280
Power, Status, and
Start (inject) indicators
Status
Indicator
Meaning
Off Idle and not yet initialised by the PowerChrom soft-
ware.
Green,
constant Idle, initialized, and waiting for a command from
the PowerChrom software.
Yellow,
constant Communicating with the computer.
Yellow,
flashing Signal sampling is occurring. May show green
between yellow flashes.
Red,
flashing An internal fault has been detected during the
power-up test. The unit must be turned off, then on
again to re-set it. If the red flashes recur then con-
tact your eDAQ distributor.
Figure 1–1
The front panel
Table 1–1
Status indicator states.