EDAN SE-1 Скачать руководство пользователя страница 8 | Manualshive

Страница: 8 / 68

EDAN SE-1 Скачать руководство пользователя страница 8

SE-1 Electrocardiograph User Manual Safety Guidance

- 1 -

Chapter 1 Safety Guidance

This chapter provides important safety information related to the use of the single channel

e

lectrocardiograph.

1.1 Indications for Use/Intended Use

The intended use of the single channel

e

lectrocardiograph

is to acquire ECG signals from adult

and pediatric patients through body surface ECG electrodes. The electrocardiograph is intended
to be used only in hospitals or healthcare facilities by doctors and trained healthcare professionals.
The cardiogram recorded by the single channel

e

lectrocardiograph can help users to analyze and

diagnose heart disease. However the ECG is offered to clinicians on an advisory basis only.

1.2 Warnings and Cautions

In order to use the electrocardiograph safely and effectively, and avoid possible dangers caused
by improper operation, please read through the user manual and be sure to be familiar with all
functions of the equipment and proper operation procedures before use.

Please pay more attention to the following warning and caution information.

Note:

1. This device is not intended for home use.

2. The pictures and interfaces in this manual are for reference only.

1.2.1 Safety Warnings

WARNING

1. The electrocardiograph is intended to be used by qualified physicians or personnel

professionally trained. They should be familiar with the contents of this user manual
before operation.

2. Only qualified service engineers can install this equipment, and only service

engineers authorized by the manufacturer can open the shell. Otherwise, safety
hazards may happen.

3. Only qualified installation or service engineers can shift the mains supply shift switch

(100V-115V~/220V-240V~) according to local mains supply specifications.

«
...
6
7
8
9
10
...
»

Содержание SE-1





































































Отзывы:

Нет отзывов