EDAN SE-1, Руководство пользователя, Страница: 29 / 68

SE-1 Electrocardiograph User Manual Operation Preparations
- 22 -
Please refer to the maintenance section for how to recharge the battery. When the
battery is being recharged, SE-1 can be powered by the mains supply at the same time.
WARNING
The potential equalization conductor of the unit should be connected to the potential
equalization bus bar of the electrical installation when necessary.
4.2 Loading/Replacing Recorder Paper
The rolled thermal paper with the width of 50mm is used. When the recorder paper runs out or
is not loaded, the hint
PAPER?
will appear on the screen. Then you should load or replace the
recorder paper immediately.
Loading/Replacing Process:
1) Place fingers under the two flanges of the recorder casing, pull them upwards directly to
release the casing;
2) Take out the paper roller, and remove remainder paper from the roller if necessary;
3) Take off the wrapper of the new thermal paper roll, and then put the paper roll through
the roller;
Paper Roller
Groove
Rol
Casing
Printer Platen
Paper Tray
Scale
Thermal Print Head