ED EPT20-15EHJ, Руководство по обслуживанию

Страница: 5 / 29

2
REV. 03/2015
DRIVE UNIT
2.DRIVE UNIT
Place hardwood blocks under the Frame as shown
in Figure 01201.Make the drive wheel hang in the air
Unfasten the four screws (index 1, Figure 01202) by
using a wrench and remove the upper cover (index 3)
and the lower cover (index 2) .
Dismantle the motor cable box (index 4) and remove
the two cables (index 5).Unscrew the three screws
(index 6) and take down the brake (index 7).Unfasten
the eight screws (index 8) and remove the gear box
cover (index 9) and the gears (index 10) .Note the
number and position for reference at assembly.Then
knock out the assembly (index 12) after unscrewing
the fi ve screws (index 11).Refer to Figure 01203.
CAUTION
Put the hardwood block as neer the drive wheel as
possible.
2.1 Disassembly and Assembly