ED EPT20-15EHJ, Руководство по обслуживанию

Страница: 20 / 29

17
REV. 03/2015
ELECTRICAL
5. ELECTRICAL
Change the batteries
Lift the forks by moving the handle (index 1)
up and down to the highest.Rotate the handle
a few degrees to the left or right as shown in
Figure 01501.
Remove the two screws (index 2) and take out
the battery cover (index 4).
After the wire harness and cables have been
removed from the batteries carefully, the
batteries can be took out.
Change the charger
Lift the forks by moving the handle (index 1)
up and down to the highest.Rotate the handle
a few degrees to the left as shown in Figure
01502.
Remove the two screws (index 2) and take out
the battery cover (index 4).Then remove the
wire harness from the battery.
Remove the battery connector (index 5) in order
to replace the charger easily.
Refer to Figure 01503.Unscrew the three lock
nuts (index 6) and remove the bracket (index 7)
from the front frame.
Disconnect the LED lamp and charger cable
from the charger. Unfasten the screws (index
10) and lock nuts (index 11).Then the charger
can be replaced.
5.1 Disassembly and Assembly