ED Nord EXCELAM-Q 1100RS Скачать руководство пользователя страница 2

3

2

WARNING

If you ignore this symbol, you could suffer serious injury or death.

This symbol means a prohibited action. 
If you ignore a prohibited action, you could 
suffer a personal injury and damage 
the machine

This symbol means a required action. 
If you don't follow this action, your safety is 
not guaranteed.
Required action will be included in this symbol.

“Important Safety Instruction” is for the purpose of user’s safety and prevention of Property loss. 
Read thoroughly and use rightly according to the manual.

Important Safety Instruction is classified as “Warning” and “Caution”, the meaning is as follows.

This symbol means that you could suffer personal injury and damage the machine. 

CAUTION

If you ignore this symbol, you could receive a serious injury or loss of property.

WARNING

Do not overload a power supply.

Do not connect or disconnect with wet hands, as this will cause an electric shock.

Make sure plug is in the socket, as it could cause fire or an electric shock.

Do not use a damaged plug or lead, as this could cause a fire or an electric shock.

Do not use other voltage and power supply other than specified, 
as this will cause a fire and an electric shock.

Do not dissemble, make repairs or  convert the machine. Contact your dealer for repairs.

Do not use materials near a naked flame.

Do not use the flammable spray or flammable materials inside or outside the machine. 
As this could cause a fire.

Do not allow children use of this equipment.

Do not spill any liquids on the laminator as this will cause damage and a possible electric shock.

Danger, Malfunction, loss of electricity could cause an electric shock.

EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500

Содержание EXCELAM-Q 1100RS
















Отзывы: