Partner
®
EGR430T User’s
Manual
6
To restore full functionality of the device and to avoid risk of losing
user data, replace the complete set of batteries as soon as
possible. Do not mix old and new batteries.
H o w t o r e p la c e t h e b a t t e r i e s
y
Ensure the power is off. Press ON/OFF to turn the device off.
9
Never try to remove batteries from the device when the power
is on. This can seriously damage the device. If you experience
difficulty turning the device off, press the RESET button on the
right-hand side of the keyboard (over the O button) and reset
the system.
y
Remove the battery compartment cover by sliding it away from
the device.
y
Remove the used batteries and replace them with new ones.
9
When replacing the batteries, you have 2 minutes to place new
ones in the device without risk of losing any data stored in
RAM.
Do not exceed the 2-minute limit!
Neither the
manufacturer nor the dealer may be held responsible for loss
of user data.
y
Make sure to place the batteries according to the polarity
marks (+ -) inside the compartment.
y
Replace the battery compartment cover by sliding it toward the
device. Make sure the cover sits in place properly.
9
The EGR430T is equipped with a jack for external power
supply.
9
Use of an inappropriate external power supply may cause
failure of the device and may void the warranty.
The AC/DC
adapter should provide 6V and min 300mA DC current.
9
Communication with a PC consumes a considerable amount of
energy. Always try to use an external power supply during
these operations.
Initialization
The initialization routine is started
▫
when EGR430T is turned on for the first time;
▫
when you remove the batteries (e.g. during replacement);
▫
after the system has been reset with the RESET button.
9
The RESET button is located on the right-hand side of the
keyboard (over the O button). It can be accessed with any thin
