ECS PN1 SLI2 Extreme, Руководство пользователя

Страница: 45 / 62

3-18
3.3-8 Load Performance Defaults
If you select this item and press Enter a dialog box will appear. If you select
[OK], and then Enter, the Setup Utility loads a set of performance default
values. These default settings are quite demanding and your system might
not function properly if you are using slower CPU, memory, or other low-
performance components.
Warning: To load Performance settings may make your system become unstable or
unbootable. When loading the Performance Defaults fails, users can choose
“either” step to return the motherboard to its defaults BIOS:
1. Power on the system and press “Insert” key. The system will bypass the previous
BIOS setting and automatically reload the default BIOS. (This
procedure is BIOS setup only!)
2. Apply to the jumper setting reference onboard and proceed with the “Clear
CMOS” to recover the default BIOS setting. Please refer to Chapter 2, page 9, to
complete the clear CMOS action. (This procedure requires opening the chasis!)
Users please use the factory BIOS default setting of “Load optimized
Defaults” when install Operation System onto your system.
and then press <F7>.
3.3-9 Load Optimized Defaults
This option opens a dialog box that lets you install optimized defaults for all
appropriate items in the Setup Utility. Press <Y> and then <Enter> to
install the defaults. Press <N> and then <Enter> to not install the de-
faults. The optimized defaults place demands on the system that may be
greater than the performance level of the components, such as the CPU
and the memory. When your hardware doesn’t support the “Optimized
Defaults”, fatal system errors or instability may occur. If you only want to
install setup defaults for a specific option, select and display that option,