ECS PN1 SLI2 Extreme, Руководство пользователя

Страница: 41 / 62

3-14
KB Power On Password (Enter)
Press Enter and key in the password for Keyboard power on.
Hot Key Power ON (Ctrl-F1)
Use this item to allocate the hot key to wake up the system.
Onboard FDC Controller (Enabled)
This option enables the onboard floppy disk drive controller.
Onboard Serial Port 1 (3F8/IRQ4)
This option is used to assign the I/O address and interrupt request (IRQ) for onboard
serial port 1.
Onboard Parallel Port (378/IRQ7)
This option is used to assign the I/O address and interrupt request (IRQ) for the
onboard parallel port.
Parallel Port Mode (SPP)
Enables you to set the data transfer protocol for your parallel port. There are four
options: SPP (Standard Parallel Port), EPP (Enhanced Parallel Port), ECP (Extended
Capabilities Port) and ECP+EPP.
PWRON After PWR-Fail (OFF)
This item enables your computer to automatically restart or return to its last operating
status.
3.3-5 Power Management Setup
This option lets you control system power management. The system has
various power-saving modes including powering down the hard disk, turning
off the video, suspending to RAM, and software power down that allows
the system to be automatically resumed by certain events.
ACPI Suspend Type [S3(STR)]
HPET Function [Disabled]
Video Off Method [DPMS Support]
HDD Power Down [Disabled]
HDD Down In Suspend [Disabled]
Soft-Off by PBTN [Instant-Off]
Resume By PCI PME [Enabled]
Resume By Ring [Disabled]
Resume By USB (S3) [Disabled]
Power-On by Alarm [Disabled]
Day of Month Alarm 0
Time (hh:mm:ss) Alarm 0 : 0 : 0
Item Help
Menu Level
Phoenix-AwardBIOS CMOS Setup Utility
Power Management Setup
F5:Previous Values F6:Performance Defaults F7:Optimized Defaults
: Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1: General Help
x
x