ECS PN1 SLI2 Extreme, Руководство пользователя

Страница: 39 / 62

3-12
On-Chip IDE Channel 0 (Enabled)
Use this item to enable or disable the PCI IDE channels that are integrated
on the motherboard.
Primary/Secondary Master/Slave PIO (Auto)
The IDE channel supports a master device and a slave device. These two
items let you assign the kind of PIO (Programmed Input/Output) was used
by the IDE devices. Choose Auto to let the system auto detect which PIO
mode is best, or select a PIO mode from 0-4.
IDE Function Setup (Press Enter)
Scroll to this item and press <Enter> to view the following screen:
OnChip IDE Channel0 [Enabled]
Primary Master PIO [Auto]
Primary Slave PIO [Auto]
Primary Master UDMA [Auto]
Primary Slave UDMA [Auto]
Secondary Master PIO [Auto]
Secondary Master PIO [Auto]
Secondary Master UDMA [Disable]
Secondary Slave UDMA [Disable]
IDE DMA transfer access [Enabled]
Serial-ATA Controller [All Enabled]
IDE Prefetch Mode [Enabled]
Item Help
Menu Level
Phoenix-AwardBIOS CMOS Setup Utility
IDE Function Setup
F5:Previous Values F6:Performance Defaults F7:Optimized Defaults
: Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1: General Help
Primary/Secondary Master/Slave UDMA (Auto)
Each IDE channel supports a master device and a slave device. This motherboard
supports UltraDMA technology, which provides faster access to IDE devices.
If you install a device that supports UltraDMA, change the appropriate item on this
list to Auto. You may have to install the UltraDMA driver supplied with this motherboard
in order to use an UltraDMA device.
IDE DMA transfer access (Enabled)
This item allows you to enable the transfer access of the IDE DMA then burst onto
the PCI bus and nonburstable transactions do not.
Serial-ATA Controller (All Enabled)
This item allows you to enable or disable the onboard SATA channel devices.
IDE Prefetch Mode (Enabled)
The onboard IDE drive interface supports IDE prefetching, for faster drive access.
If you install a primary and secondary add-in IDE interface, set this field to
Disabled if the interface does not support prefetching.
Press <Esc> to return to the Integrated Peripherals page.