ECS PF21 Extreme, Руководство пользователя, Страница: 40 / 85

3-13
Press <Esc> to return to the Integrated Peripherals page.
UR2 Duplex Mode [Half]
This field is available when UART 2 Mode is set to either ASKIR or IrDA. This item
enables you to determine the infrared function of the onboard infrared chip. The
options are Full and Half (default).
Full-duplex means that you can transmit and send information simultaneously. Half-
duplex is the transmission of data in both directions, but only one direction at a time.
Use IR Pins [IR-Rx2Tx2]
Please consilt your IR peripheral documentation to select the correct setting of the
TxD and RxD signals.
Onboard Parallel Port (378/IRQ7)
This option is used to assign the I/O address and interrupt request (IRQ) for the
onboard parallel port.
Parallel Port Mode (ECP)
Enables you to set the data transfer protocol for your parallel port. There are four
options: SPP (Standard Parallel Port), EPP (Enhanced Parallel Port), ECP (Extended
Capabilities Port) and ECP+EPP.
SPP allows data output only. Extended Capabilities Port (ECP) and Enhanced Parallel
Port (EPP) are bi-directional modes, allowing both data input and output. ECP and EPP
modes are only supported with EPP- and ECP-aware peripherals.
ECP Mode Use DMA (3)
When the onboard parallel port is set to ECP mode, the parallel port can use DMA 3
or DMA 1.
3.3-5 Power Management Setup
This option lets you control system power management. The system has
various power-saving modes including powering down the hard disk, turning
off the video, suspending to RAM, and software power down that allows
the system to be automatically resumed by certain events.
ACPI Suspend Type [S3(STR)]
Run VGABIOS if S3 Resume [Auto]
Video Off Method
[DPMS]
Video Off In Suspend [Yes]
Suspend Type [Stop Grant]
MODEM Use IRQ [3]
Suspend Mode [Disabled]
HDD Power Down [Disabled]
Soft-off by PWR-BTTN [Instant-off]
Resume by PCI PME [Enabled]
Resume by Ring [Disabled]
Resume by USB (S3) [Disabled]
Resume by Alarm [Disabled]
*Date (of Month) Alarm 0
*Time (hh:mm:ss) Alarm 0:0:0
**Reload Global Timer Events**
Primary IDE 0 [Disabled]
Item Help
Menu Level
Phoenix-AwardBIOS CMOS Setup Utility
Power Management Setup
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
: Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1: General Help