3-4
Note:
Before attempting to configure a hard disk drive, ensure that you have the
configuration information supplied by the manufacturer of your hard drive.
Incorrect settings can result in your system not recognizing the installed hard
disk.
Access Mode
This item defines ways that can be used to access IDE hard disks such as LBA
(Large Block Addressing). Leave this value at Auto and the system will automatically
decide the fastest way to access the hard disk drive.
Press <Esc> to return to the Standard CMOS Features page.
Drive A [1.44M, 3.5in.]
These items define the characteristics of any diskette drive attached to the system.
You can connect one or two diskette drives.
Floppy 3 Mode Support [Disabled]
Floppy 3 mode refers to a 3.5-inch diskette with a capacity of 1.2 MB. Floppy 3
mode is sometimes used in Japan.
Video [EGA/VGA]
Thsi item defines the video mode of the system. This motherboard has a built-in
VGA graphics system; you must leave this item at the default value.
Halt On [All Errors]
This item defines the operation of the system POST (Power On Self Test) routine.
You can use this item to select which types of errors in the POST are sufficient to
halt the system.
Base Memory, Extended Memory and Total Memory
These items are automatically detected by the system at start up time. These are
display-only fields. You cannot make chanages to these fields.
3.3-2 Advanced BIOS Features
This option defines advanced information about your system.
CPU Feature
[Press Enter]
Hard Disk Boot Priority
[Press Enter]
CPU L3 Cache
[Enabled]
Hyper-Threading Technology [Enabled]
Quick Power On Self Test
[Enabled]
First Boot Device
[Floppy]
Second Boot Device
[Hard Disk]
Third Boot Device
[CDROM]
Boot Other Device
[Enabled]
Boot Up Floppy Seek
[Disabled]
Boot Up NumLock Status
[On]
Gate A20 Option
[Fast]
Typematic Rate Setting
[Disabled]
Typematic Rate (Chars/Sec0 6
Typematic Delay (Msec)
250
Security Option
[Setup]
APIC Mode
[Enabled]
Item Help
Menu Level
Phoenix-AwardBIOS CMOS Setup Utility
Advanced BIOS Features
X
X
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
: Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1: General Help
CPU Feature (Press Enter)
Scroll to this item and press <Enter> to view the following screen:
Содержание PF21 Extreme
Страница 1: ......
Страница 48: ...Chapter 4 This chapter delivers contents of the ECS support CD...