63
If you cannot get a legacy ISA (Industry Standard Architecture)
expansion card to work properly, you might be able to solve the
problem by changing this item to Manual, and then opening up the IRQ
Resources and Memory Resources sub-menus.
In the
IRQ Resources
sub -menu, if you change any of the IRQ
assignations to Legacy ISA, then that Interrupt Request Line is
reserved for a legacy ISA expansion card. Press <Esc> to close the
IRQ Resources sub-menu.
In the
Memory Resources
sub menu, use the first item Reserved
Memory Base to set the start address of the memory you want to
reserve for the ISA expansion card. Use the second item Reserved
Memory Length to set the amount of reserved memory. Press <Esc> to
close the Memory Resources sub-menu.
PCI/VGA Palette Snoop
Default: Disabled
This item is designed to overcome some problems that can be caused
by some non-standard VGA cards. This board includes a built-in VGA
system that does not require palette snooping so you must leave this
item disabled.
Assign IRQ for VGA/USB
Default: Enabled
Names the interrupt request (IRQ) line assigned to the USB/VGA (if any)
on your system. Activity of the selected IRQ always awakens the
system.