21
3. Identify the pin-1 corner on the Socket 370 and the pin-1
corner on the processor. The socket pin-1 corner is adjacent
to the handle of the locking lever. The processor pin-1
corner is beveled.
4. Matching the pin-1 corners, drop the processor into the
socket. No force is required and the processor should seat
into the socket easily.
5. Swing the locking lever down and hook it under the latch on
the edge of the socket. This locks the processor in place.
6. Locate the power cable on the heatsink/cooling fan
assembly that is attached to the top of the processor.
7. Plug the power cable into the CPU cooling CPUFAN1 12V-
power supply on the mainboard.
The mainboard must be configured to deliver the correct clock
speed and the correct system bus for the kind of processor that
you have installed. You can do this by using the system Setup
Utility. The first time you start the system, immediately enter the
setup system and make the appropriate settings. Usually, you
can automatically configure the CPU by using the CPU & BIOS
Features page of the Setup Utility. See Chapter 3 for more
information.