ECS P6IWT-Me Скачать руководство пользователя страница 67 | Manualshive

Страница: 67 / 73

ECS P6IWT-Me Скачать руководство пользователя страница 67

63

Peripheral Folder

You can use the software in the following sub-folders:

q

LAN: Drivers and software for the built-in network adapter

q

KEYBOARD, CD-ROM, MOUSE: These three folders have drivers

for accessories manufactured by BTC. Some system assemblers
ship these accessories with complete systems based on this
mainboard.

Intel Folder

q

I810_ACPI: This folder has a patch program so that the suspend to

RAM feature will run under Windows 98(ACPI)

q

INF: This folder has a variety of programs, all designed to improve

the operation of Intel chipsets under Windows 95/98.

q

VGA: This folder has drivers and software for the graphics system

built into the Intel 810 chipset.

P6IWT-Me Folder

You can use the software in the following sub-folders:

q

MONITOR : Hardware monitoring software for Windows 95/98, and

Windows NT4.0/5.0

q

ACPI, AUDIO, LAN, MODEM, VGA, WIN9x-Inf: These folders are

empty. A readme file directs you to an alternate location with the
required software.

Note: Some folders are subdivided into different operating
systems such as DOS, Windows 95, Windows NT, and so on.
Always make sure that you are installing the correct software for
the operating system on your computer. Some folders are also
subdivided into different language versions, such as English,
French, German and so on.

Note: Before installing any software, always inspect the folder for
files named README.TXT, INSTALL.TXT, or something similar.
These files may contain important information that is not included
in this manual.

«
...
65
66
67
68
69
...
»

Содержание P6IWT-Me










































































Отзывы:

Нет отзывов