manualshive.com logo in svg

ECS P6IWT-Me, Руководство пользователя, Страница: 56 / 73

Поделиться
Скачать
ECS P6IWT-Me Скачать руководство пользователя страница 56

52

USB Controller

Default: Enabled

Use this item to enable the USB ports that are integrated on this mainboard.

USB Keyboard Support

Default: Disabled

Enable this item if you are using a keyboard connected through the USB Port.

Init Display First

Default: PCI Slot

Use this item to define if your graphics adapter is installed in one of the PCI slots
or select Onboard if you have a graphics system integrated on the mainboard.

Hardware Reset

Default: Enabled

If you enable this item, you can reset the system by pressing a hardware reset
button if you have connected this function to the mainboard.

Onboard PCI Audio

Default: Enabled

If your mainboard has an integrated PCI audio system, use this item to enable or
disable it.

Onboard PCI Modem

Default: Enabled

If your mainboard has an integrated PCI modem, use this item to enable or
disable it.

Onboard PCI LAN

Default: Enabled

If your mainboard has an integrated PCI LAN (network adapter), use this item to
enable or disable it.

AC97 Audio

Default: Disabled

We recommend that you set this item to Enabled when you use AMR card.

AC97 Modem

Default: Disabled

We recommend that you set this item to Enabled when you use MR/AMR card.

IDE HDD Block Mode

Default: Disabled

Block mode transfers can improve the access to IDE devices. Enable this item if
your IDE devices support block mode transfers.

Power On Function

Default: Hot KEY

KB Power ON Password

Default: Enter

Hot Key Power ON

Default: Ctrl-F12

The Power On Function item allows you to power on the system by pressing hot-
keys, or typing a password. If you choose Password, you can use the item KB
Power On Password to install a power on password. Press Enter to display the
Password dialog box. If you set it to Hot Key, you can then use the item Hot Key
Power On to choose which hot keys are used to power on the system.

Onboard FDC Controller

Default: Enabled

Use this item to turn on or off the floppy disk controller that is built into this
mainboard.

Onboard Serial Port 1

Default: 3F8/IRQ4

This item lets you disable the built-in serial port 1, or enable it by assigning an
I/O address and an Interrupt Request Line (IRQ).

Содержание P6IWT-Me










































































Отзывы:

Нет отзывов