26
you start the system, immediately enter the setup system and make the
appropriate settings. Usually, you can automatically configure the CPU
by using the BIOS Features page of the setup utility. See Chapter 3 for
more information.
Installing a Socket-370 Processor
If you have decided to install the mainboard with a PPGA Celeron
processor, follow the steps below.
Locate the Socket-370 and CPUFAN1
CPUFAN1
Socket-370
Locking lever
Pin-1 corner
1. On the mainboard, locate the socket-370 and CPUFAN1.
2. On the socket-370, pull the locking lever away from the socket to
unhook it and then raise the locking lever to the upright position.
3. Identify the pin-1 corner on the socket-370 and the pin-1 corner on
the processor. The socket pin-1 corner is adjacent to the handle of
the locking lever. The processor pin-1 corner is beveled.
4. Matching the pin-1 corners, drop the processor into the socket. No
force is required and the processor should seat into the socket easily.
5. Swing the locking lever down and hook it under the latch on the
edge of the socket. This locks the processor in place.