manualshive.com logo in svg

ECS B75H2-AM2, Руководство пользователя, Страница: 40 / 52

Поделиться
Скачать
ECS B75H2-AM2 Скачать руководство пользователя страница 40

36

Using BIOS

Integrated Peripherals

This page sets up some parameters for peripheral devices connected to the system.

Onboard SATA Controller (Enabled)

This item allows you to enable or disable the onboard SATA controller.

Onboard SATA Mode (Native IDE)

Use this item to select the mode of the Serial ATA.

BIOS Setup Utility

Onboard SATA  Controller

[Enabled]

Onboard SATA  Mode

[Native IDE]

Onboard USB Controller

[Enabled]

Legacy USB Support

[Enabled]

USB Storage Emulation

[Auto]

Onboard Graphics Controller

[Enabled]

Onboard Audio Controller

[Enabled]

Onboard  LAN Controller

[Enabled]

Onboard  LAN Option ROM

[Disabled]

Serial Port1 Address

                        [3F8,IRQ4]

Serial Port2 Address                                     [2F8,IRQ3]
Parallel Port Address                                     [378]
Parallel Port Mode                                         [Normal]
Parallel Port IRQ

[IRQ7]

Onboard SATA Controller.

+/-/Spacebar  : Change Opt.

Enter : Select

           F7: Load User default Settings

:Move

          F8: Save as User Default
         Settings

           F9: Load Default  Settings

    F10: Save & Exit Setup

ESC: Discard changes and Exit
Setup

 

Version 2.14.1219. Copyright (C) 2002-2012, Acer Inc.

                 Main

    

Advanced 

     Power    Security     Boot    Options     Exit

Legacy USB Support (Enabled)

Use this item to enable or disable support for legacy USB devices. Disabling it might
cause the USB devices not to work properly.

Onboard USB Controller (Enabled)

Use this item to enable or disable the onboard USB controller. We recommend users
keep the default value.

USB Storage Emulation (Auto)

If Auto, USB device equal or less than 2GB will be emulated as Floppy and remaining
as hard drive. Forced FDD option can be used to force a HDD formatted drive to boot
as FDD (Ex. ZIP drive).

Onboard Graphics Controller (Enabled)

This item indicates the status of the onboard graphics controller.

Onboard Audio  Controller  (Enabled)

This item enables or disables the onboard audio controller.

Serial Port1 Address (3F8, IRQ4)

Use this item to enable or disable the onboard COM1 serial port, and to assign a port

address.

Onboard LAN Option ROM (Disabled)

This item enables or disables the onboard LAN option ROM function.

Onboard  LAN Controller  (Enabled)

This option allows you to control the onboard LAN device.

Содержание B75H2-AM2





















































Отзывы:

Нет отзывов